uxcell 6-inch 5-inch Hook and Loop Backing Pad, Orbital Sander Polisher Polishing Sanding Pad M14 M10 Drill Adapter 2pcs

Specification : Pad Total Size : 150 x 41mm/6 x 1.61-inch(D*L), 125 x 34mm/5 x 1.34-inch(D*L)Adapter Total Size : 19 x 45mm/0.75 x 1.77-inch(D*L)Thread Size : M14 x 13mm, M10 x 13mmShaft Size : 8 x 27mm/0.31 x 1.06-inch(D*L)Package Content : 1 x 6-inch Hook and Loop Backing Pad1 x M14 x 13mm Drill Adapter1 x 5-inchHook and Loop Backing Pad1 x M10 x 13mm Drill AdapterDescription:1.The hook and loop backing pad will makes the changing between the synthetic wool pad and the sanding very easy and simple2.The polishing sanding pad is used with orbital sander.The front side can be equipped with a grinder, while the back side can be bonded with flocking sandpaper, water grinding sheet, wool polishing sanding and sponge polishing wheel3.The hook and loop backing pads is used with bench mill grinder(not need drill adapter) and electric drill(need drill adapter)4.Suitable for polishing furniture, wood, metal surfaces, and automotive car surfaces

• Features: Pad Total Size : 150 x 41mm/6 x 1.61-inch(D*L), 125 x 34mm/5 x 1.34-inch(D*L); Adapter Total Size : 19 x 45mm/0.75 x 1.77-inch(D*L); Thread Size : M14 x 13mm, M10 x 13mm; Shaft Size : 8 x 27mm/0.31 x 1.06-inch(D*L)
• [USAGE]: The backing pad is used with sanding papers or polishing pads, for use on angle grinders, bench grinders, electric drills and other pneumatic and electric tools. Widely used for wood products, mobiles, metal products, and floor and wall polishing.
• [MATERIAL]: The PP material is durable and not easy to crack, resistant to low temperature -20°C. The high toughness cushion and the special-shaped processing surface fit more comprehensively and have good air permeability.
• [FEATURES]: Hook and Loop backing can be replaced quickly and easily, has strong bonding ability. The hooks of the sticking plate are closely arranged, the distribution is full and even, is not easy to loose and slide.
• [NOTE]: The adapter rod is a left-handed thread, and the direction of rotation should be clockwise. If you rotate it counterclockwise, the backing pad may loosen. It is recommended to idling for more than one minute before use, and observe whether the machine is operating normally.