The Latest V6 Anti-roll 3D Touch Probe Edge Finder and Center-Finding Precision CNC Probe are Compatible with mach3 and grbl (6MM NC)

Introduction: The 3D Touch Probe three-dimensional coordinate probe, by connecting to the CNC (Mach3, GRBL control board) signal input port (tool setting edge), can realize quick center finding, edge finding, circle center finding, table shape measurement and other functions, which greatly solves the problem of machining. The trouble of positioning the workpiece for secondary clamping during the process. Working voltage: DC5-24V wide voltage Indicator light: green light when powered on, red light after triggering The shell is made of fine matte black + silver oxidized aluminum alloy, with a flat anti-roll design. The stylus is machined from stainless steel up and down, and the ball head is made of tungsten steel ball to resist wear. Compatible with various control boards/boxes such as grbl control board and Mach3 One-way repeat positioning accuracy is less than 0.01 MM The probe uses internal circulation conduction to detect the workpiece, so it can be used to detect non-conductive and insulating workpieces Three-wire NPN-NO VCC red wire is connected to the power supply 5-24V I0(OUT) yellow line: signal output line high level is consistent with VCC GND black wire: ground wire or 0V, can be connected to GND and COM-, DCM Before shipment, the concentricity should be fine-tuned to within 0.05 and then measured and adjusted by yourself after receiving it. Note: Please be sure to use an ER11 spring collet of AAA or above grade, otherwise the concentricity of the probe cannot be guaranteed when used. (Even if the ordinary spring chuck is installed with our probe and the concentricity is adjusted, and the probe is removed and reinstalled, the concentricity will be off Product name: Three-coordinate wired probe/3D Touch Probe withCable Product model: V6 version/TP06 Stylus direction: ±X, ±Y, +Z One-way repeatability: <0.01 mm (standard stylus, FeedRate: 50-200mm/min) Stylus stroke protection distance: ±4mm in XY plane, 2mm in Z direction (tungsten steel ball comes standard with stylus) Trigger life:>3 million triggers(Life greater than 3 milliontriggers) Power supply: 5~24 V DC Cord length: 2 m

• V6 anti-roll 3D Touch Probe edge finder TP06