Manual Tile Cutter, 24 inch Porcelain Ceramic Tile Cutter with Tungsten Alloy Cutting Wheel, Tile Cutter Tool for Porcelain Ceramic Floor Tile, Infrared Positioning Guided Precision

A manual tile cutter is a commonly used cutting tool in construction. The reinforced tungsten alloy cutting wheel can ensure efficient cutting. Simply apply appropriate pressure on the handle to push the cutting wheel into the tile for cutting. Compared to electric tile machines, manual tile machines are compact and easy to operate, making them suitable for cutting a wide range of tiles.DetailsErgonomic Handle: The curved ergonomic handle makes it easier to operate with less effort. The aluminum alloy handle has a non-slip rubber cover on the end, which does not hurt your hand and makes it more comfortable to use.Balancing Bracket&Ruler Bar: They can flexibly move within 90° to support the tiles and accurately measure them.ApplicationIt is suitable for cutting materials with a thickness within 3/5'' and width within 0.39-23.6'', such as wall tiles, groove tiles, raised tiles, patterned tiles, flat tiles, solid tiles, glazed tiles, polished tiles, glass tiles, and many other mainstream tiles. It can be used in multiple workshops and industrial sites.How to Use1. Fixed Position: Hold the handle with one hand, pull the slide back to the seat, and place the ceramic tile flat on the base plate (if necessary, extend the ruler to measure). Align the cutting line of the ceramic tile with the center support plate, and the front end of the ceramic tile should be close to the notch of the base plate.2. Score and Press Down: Lower the handle and make the cutting wheel contact with the surface of the ceramic tile. Push the handle forward lightly to cut a continuous, even straight line on the ceramic tile.3. Break-off: Lift the handle slightly backward, allowing the pressure block to fall smoothly onto the front end of the ceramic tile. Apply appropriate force to push the handle down, and the ceramic tile will break along the scoring line.SpecificationProduct Model: 800FCutting Wheel Model: YG96Color: BlueCutting Wheel Material: Tungsten AlloyHandle&Bearing Material: Aluminium AlloyBase Material: Aluminium Alloy, SpongeSlide Rail Material: Alloy SteelSlide Rail Surface Treatment: Hardening Process, Electroplating ProcessOperating Method: ManualGuide Rail: Dual TrackSpecial Function: Infrared PositioningBalancing Brackets&Ruler Bar Adjustable Angle Range: 0-90°Battery Type: 2* AAA (Included)Slide Rail Diameter: 20mm/0.78inBase Plate Thickness: 1.2mm/0.04inMaximum Cutting Width: 60cm/23.6inMinimum Cutting Width: 1cm/0.39inchMaximum Cutting Thickness: 15mm (3/5inch)Gross Weight: 8kg/17lbsPackage Size: 82*25*18cm/32*9*7inchBase Size (L*W): 81*20cm/31*7.87inchPackage Included1* Manual Tile Cutter (With Balancing Brackets+Ruler Bar)1* English ManualNotes1. Shallow and thin knife marks result in a flatter edge of the tile when chipping, while deep and thick knife marks lead to a slanted and unattractive edge.2. Please note that the force used when pushing must be light and the cut marks on the top of the tile must not be interrupted, otherwise, the tile will be chipped.3. It is recommended that you choose a tile with a flat surface to cut.4. Please read the manual completely before installation and use, and pay par

• Powerful Performance - This 24-inch tile cutting machine is designed to swiftly and effortlessly tackle your home renovation projects. Maximum Cutting Width: 60cm/23.6in, Minimum Cutting Width: 1cm/0.39 inch, Maximum Cutting Thickness: 15mm (3/5 inch). The reinforced tungsten alloy cutting wheel with high hardness can ensure smooth and flat cutting without burrs, making the joints more beautiful to save decoration costs with an efficiency of 5–10 times higher than an electric cutting machine
• Precision Positioning - The embedded collimator with infrared positioning function and the precise guiding ruler with clear scale can facilitate high-precision cutting. Plus, the balancing bracket and ruler bar can flexibly move within 90° to support the tiles and accurately measure them
• Excellent Stability - The large and thickened base and screw-reinforced handle ensure good stability, so you can use this product safely. And the thickened sponge pad on the base and shockproof U-shaped sheath can protect the tiles from breakage. Meanwhile, you can adjust the ruler through nuts
• Durable Construction - The tungsten alloy cutting blade wheel exhibits outstanding toughness and rigidity, effortlessly scoring and breaking tiles. The machine features corrosion-resistant hardened alloy steel slide rail, aluminum alloy handle, bearing and base, providing peace of mind for your tile laying and home remodeling projects
• Effortless to Operate – Our rorcelain ceramic tile cuttercan achieve dust-free and noise-free cutting, providing you with a comfortable operating environment. The curved handle design makes it easier to press the tile, while the non-slip rubber cover increases the comfort of the cutting process and does not hurt your hand