M10 HUD Display with Lens Hood Yellow Led Windshield Projector Head Up Display OBD Scanner Speed Fuel Warnin

This product Design Patent and Display Images Copyright had been registered with customs record(This product Design Patent and Display Images Copyright had been registered with customs record)HUD short for Head Up Display.It displays driving datas on the front windshield such asspeed,RPM,water temperature,voltage,single mileage etc on the car front window glass;avoiding drivers unsafety because of watching the instrument while driving.Drivers can read the driving information instantly , and can always keep the best state on the way with HUD.Solution for Common ProblemsDo a reset setting.5.Inaccurate Speeda.First check the speed unit is correct or not, the speed unit including KM/H and MPH, short press in the wave button to switch between KM/H and MPHb.When HUD is power on,vertical press the setting button for 5 seconds to enter into the menu options, find menu 1,the parameter shows 107,up or down the setting button to increase or decrease the value according to the difference until it shows correct one.After adjustment, vertical press in 5 seconds to save it.

• 1.The screen without any display,and no electricity
• Start the car engine;check if the OBD cable line is tight;please pull down the OBD cables more times to ensure;check if HUD power switch turns on. If no display still,please change another car to test, analyze whether the car OBD diagnostic interface is good, if it is not good,please repair it and try again.
• 2.When HUD power on, HUD only shows the car voltage and be automatic power off after 30 seconds driving.
• HUD just available for cars with OBD2 agreement and EU-OBD agreement（European region: after 03 years, Other region:after 07 years）
• HUD Products donnot support JOBD and OBDI and recommended test for another car.
• 3.See not clearly when HUD under the sunlight,and with double reflection.
• Check whether the HUD host surface protective film is torn,and please stick the reflection film on the windscreen.And vertical press in the setting button for 5 seconds to enter into menu setting when HUD is power on,short press 2 times to menu 2,adjust the parameter to 5,vertical press in 5 seconds to save.
• 4.wrong operation lead to crashes. Or inaccurate datas