HobbyEagle A3 EVO Aeroplane Flight Controller Stabilizer System 6-axle Gyro for RC Drone Airplane Fixed-Wing Copter Spare Parts

Main Controller: AVR MCU Sensor: MEMS 3-axis sensor Gyro Scale Range: ±2000 dps Size: 43×27×14mm Features: 4 Flight Modes: GYRO OFF Mode, NORMAL Mode, LEVEL Mode and HOVER Mode. 3 Wing Type: Standard, Delta-wing and V-Tail. Standard PWM receivers, PPM and Futaba S.Bus receivers supported. Throttle output channel provided when using the PPM or S.Bus mode. Separate basic gain adjustment for Aileron, Elevator and Rudder. Remote master gain supported. Standard PWM Receiver Connection Notes: [MODE] is used for flight mode switching of the gyro, connect it to a 3-way switch channel of the receiver to switch the flight mode in flight. [SBUS/PPM/G] is used for remote master gain adjusting, connect it to a proportional channel of a volume or slide lever of the transmitter to tune the master gain in flight. The ESC or throttle servo is connected to the throttle channel of the receiver directly without passing through the gyro. Pay attention to the polarity of the plugs. The orange signal line must always be on the top and the brown on the bottom.

• The A3 EVO is the latest 6-axis gyro for airplanes, which is developed based on AVR platform and applies the high efficiency, concise and mature algorithm.
• Experience with previous gyros and introduces many new features such as PPM receiver support, separate 3-axis basic gain adjustment and the throttle output channel for mini serial receivers.
• The A3 EVO provides users with more powerful and better performance.
• 3 Wing Type: Standard, Delta-wing and V-Tail. Standard PWM receivers, PPM and Futaba S.Bus receivers supported.