High Pressure Injection Pump Grouting Machine Leak Stoppage Machine for Construction, Waterproof Plugging Repair, Cracks Sealing Works 110V

Specification: High pressure pouring machine is the building and build a chemical grout sealing, structural reinforcement of specialized equipment. Working pressure: instantaneous maximum pressure up 15000Psi, flow rate of 0.74 liters / minute, chemical pulp can enter more than 0.02mm depth of 1000mm hairline cracks. Machinery components must locking screws, drill must be fully inserted into the holder, not loose, high-pressure pipe and the main body perfusion machine gun connections must be wrapped after the raw material belt tightened to prevent leakage of slurry. Notice: 1. Machine during transport will be shaking before use, to tighten all the screws again. 2. Non impregnated with the slurry particles ingredients. 3. Pressure does not prohibit the use of the viscosity of the liquid, pressure testing machine to test the use of oil and other. 4. The color of parts varies slightly with different production batches.

• [Application]: High pressure pouring machine is the building and build a chemical grout sealing, structural reinforcement of specialized equipment. Suitable for sealing cracks in various building concrete projects.
• [Parameters]: Working pressure: instantaneous maximum pressure up 15000Psi, flow rate of 0.74 liters / minute, chemical pulp can enter more than 0.02mm depth of 1000mm hairline cracks.
• [Test the Pressure]: Please tighten all the screws before using the machine. Always test the pressure with the oil before the new machine is used for the first time. It is forbidden to test with liquid without viscosity (such as toluene, acetone, water, etc.).
• [Test Method]: Pour the lubricating oil into the barrel of the machine, close the valve, the gun head is facing the outside, open the electric drill, when the pressure gauge shows the pressure of 300-400 kg, turn off the electric drill, open the valve, it will lubricate The oil is sprayed back into the oil drum, and the pressure test is successful.
• [Note]: Machinery components must locking screws, drill must be fully inserted into the holder, not loose, high-pressure pipe and the main body perfusion machine gun connections must be wrapped after the raw material tape tightened to prevent leakage of slurry.