New Arrivals/Restock

Gigabit Passive PoE Injector 24W POE Adapter 36-72V DC Input 24V PoE Output Converter (Not for 802.3af/at Devices) Compatible with 24V Passive Netgear and Mikroik Devices

flash sale iconLimited Time Sale
Until the end
08
03
44

$29.40 cheaper than the new price!!

Free shipping for purchases over $99 ( Details )
Free cash-on-delivery fees for purchases over $99
Please note that the sales price and tax displayed may differ between online and in-store. Also, the product may be out of stock in-store.
New  $49.00
quantity

Product details

Management number 218505744 Release Date 2026/05/03 List Price $19.60 Model Number 218505744
Category

Overview:The LNK-DC-P24G is a low cost and high efficiency solution for those requiring Passive Power over Ethernet from a 36-72VDC voltage source. They have an integrated POE injector to apply the power and data output to the CAT5/6 Ethernet cable. The output voltage is regulated and protected.Features:Input Voltage 36-72VDC; Output 24VDC (Passive)Integrated Gigabit PoE Inserter; High Power 24WHigh Efficiency > 85%; Nominal Frequency 50/60KHzSupport 10/100/1000Base-T, Half/Full-duplexOver-Voltage/Load/Temperature & Short Circuit protectionsPlug & Play, no configuration requiredSafe and Reliable Power to WLAN Access PointsSpecifications:Connector: LAN: 1 x RJ-45 STP, “Data” Input PortPOE: 1 x RJ-45 STP, “Data + Power” Output PortCabling: 10/100/1000Base-T, Cat5 or aboveInput Voltage Range: 36-72V DCOutput Voltage: DC 24V, 1.0APower Consumption: 24W max.Power Pin Assignment: Pin 1,2 / 4,5 (+), Pin 3,6 / 7,8 (-)Processing Type: Forward; Half-duplex, Full-duplexForward Filter Rate: 1,488,000pps (1000Mbps)Maximum Distance: Cat. 5/5e/6 up to 100m (328ft)Casing Material: Plastic CaseOperating Temperature: -10°C to 50°C (14°F to 122°F)Storage Temperature: -20°C to 70°CMounting Option: DesktopDimensions (W×D×H): 122 x 60 x 40mmWeight: 0.35KgEthernet Standards: IEEE 802.3 10Base-T EthernetIEEE 802.3u 100Base-TX Fast EthernetIEEE 802.3ab 1000Base-T Gigabit Ethernet

  • 【36~72V DC Wide Voltage Input】- The passive PoE injector supports 36~72V DC input and reduce voltage to 24V PoE output. It will solve the problem that you only have 36-72V without 24V centralized power supply.
  • 【No distinction between (+) and (-)】- There is no distinction between positive and negative poles of the gigabit PoE injector. You can connect the power supply at will, which is simple and convenient.
  • 【Safe and Reliable Design】- The 24V PoE injector has various protections for surge, short circuit and overload. And provide power output up to 24W. Safely transmit power and data to terminal equipment.
  • 【Compatible with Multiple Passive Devices】- The PoE adaptor is applied to security IP camera, AP and VoIP phone, fit for ubiquiti POE-25-5W, POE-24-12W, POE-24-24W, tp-link TL-PoE2412G and mikrotik 24V passive PoE devices, etc.
  • 【Matters Needing Attention】- Once the power is supplied, there is no detection step, regardless of whether the terminal is PoE powered devices are powered, it is very easy to burn the access equipment. So you need to know your equipment.
Brand StarRoute
Manufacturer Elenzk
Model Number Commercial Passive 24V PoE Injector
BuiltIn Media 24V Passive PoE Injector, POE injector User Manual
Compatible Devices Desktop
Data Link Protocol Ethernet, Gigabit Ethernet, IEEE 802.3
Data Transfer Rate 1000 Megabits Per Second
Hardware Interface Ethernet
Warranty Description 3 years

Correction of product information

If you notice any omissions or errors in the product information on this page, please use the correction request form below.

Correction Request Form

Product Review

You must be logged in to post a review