Construction Full Brim Safety Helmet HDPE Hard Hat Carbon Fiber Pattern Safety Helmet with 6-Point Adjustable Ratchet Suspensions Certified ANSI/ISEA Z89.1

ABOUT PRODUCT: -NAME: Full Brim HDPE Safety Hard Hats -COLOR:Black -WEIGHT:160G -SIZE:54-63CM FEATURES: -Made of premium carbon fiber material that is durable strong and lightweight. -The safety helmet meets En397:2012+A1:2012, ANSI Z89.1-2014, Type 1, Class E, G and C Standards. -Installing the suspension: 1.Turn safety helmet shell upside down.Place suspension inside safety helmet shell with brow pad toward front bill. 2.Insert the suspension tab into the respective tab slot.Push tab firmly until it locks into place.Repeat for each suspension tab. -Adjusting the suspension size: 1.Ratchet suspension:Turn ratchet knob counterclockwise until headband opens to largest size,place helmet on your head.Turn ratchet knob clockwise until headband is comfortable. 2.Buckle suspension:Press buckle to slide the sleeve tail until headband is comfortable, loosen buckle to tight. -Equipped with padded harness, adjustable 6-point ratchet suspension, chin strap and replaceable soft brow pad,making wearing our full brim hard hat feel more comfortable. ABOUT STORAGE AND USE LIFE When not in use or during transportation,this helmet should be stored in a container with paper or foam cushion to avoid damage. Store in the ventilate place without direct sunlight and contact with any solvent. Suspension should be replaced after no more than 12 months of use. Where the helmet is in use every day and particularly when used outdoors,we would anticipate that the helmet is discarded after 2 years in use.For indoor or occasional use,we would anticipate a life if 5 years from purchase provided that the helmet is stored in the correct conditions and is properly maintained. Always replace the helmet after it has withstood an impact or penetration.

• FULL BRIM DESIGN: Made of premium HDPE material that is durable strong and lightweight. Besides full brim design of this construction hard hat offers more coverage in extreme environments.
• MORE SAFER: The safety helmet meets En397:2012+A1:2012, ANSI Z89.1-2014, Type 1, Class E, G and C Standards. This safety helmet must be correctly installed according to the instruction toassure proper fit and protection.
• EASY INSTALLATION: Installing the suspension: 1.Turn safety helmet shell upside down.Place suspension inside safety helmet shell with brow pad toward front bill. 2.Insert the suspension tab into the respective tab slot.Push tab firmly until it locks into place.Repeat for each suspension tab.
• FULLY ADJUSTABLE: Adjusting the suspension size: 1.Ratchet suspension:Turn ratchet knob counterclockwise until headband opens to largest size,place helmet on your head.Turn ratchet knob clockwise until headband is comfortable. 2.Buckle suspension:Press buckle to slide the sleeve tail until headband is comfortable, loosen buckle to tight.
• MORE COMFORTABLE: Equipped with padded harness, adjustable 6-point ratchet suspension, chin strap and replaceable soft brow pad,making wearing our full brim hard hat feel more comfortable.Adjustable 6-point ratchet suspension allows you to adjust the helmet fully.