8-34mm Automatic Rebar Tying Machine, 12V Steel Bar Rod Tying Machine Portable Handheld Rebar Tier Gun with 2 Batteries for Construction Projects

Detail Winding Reel:It can facilitate loading wires,and its open design allows you to observe the usage of the binding wire at any time. Ergonomic Handle:It can effectively prevent slipping and provide a comfortable grip,allowing you to use it for a long time. Specification Color:Orange Material:Plastic,Steel Plug Type:US Standard Power Source:Battery Powered Motor Type:Pure Copper Brushed Motor Motor Voltage:12V Power Adapter Input:100-240V,50/60Hz Power Adapter Output:12V DC 1500mA Battery Type:2*12V Lithium-ion Batteries Battery Capacity:4500mAh Usage Time On a Full Charge(Each Battery):About 2H Battery Full Charging Time:1.5H Required Knot Time:0.8s Per Time Tying Wire Length:110m/361ft Tying Wire Diameter:0.8mm/0.03in Tying Range:8-34mm/0.31-1.34in Knot Wire Length:≥40cm/15.75in Machine Size:27.5*6.5*24cm/10.83*2.56*9.45in Package Size:43*34*12cm/16.93*13.39*4.72in Gross Weight:3.5kg/7.72 lbs Net Weight:2.8kg/6.17 lbs Package Included 1*Rebar Tying Machine 1 Roll*Tying Wire(Already Installed) 1 Pair*Pliers 1*Adapter 2*Batteries 1*Toolbox 1*English Manual Notes 1.Please note that the product only requires the installation of one battery,while the other is for replacement use. 2.When used,the machine head needs to be perpendicular to the plane of the steel bar.In the process of machine bundling,it is strictly forbidden to touch the jaws,the wire disc,or the wire by hand under any circumstances. 3.When the machine sounds an alarm,the machine must be powered off immediately,and then work after the fault is eliminated. 4.Please read the manual completely before use,and pay particular attention to the safety instructions included. 5.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement,and make sure you do not mind before ordering.

• 【Build to Last】Made of premium plastic and metal, this rebar tying machine is abrasion-resistant, impact-resistant, scratch-resistant, and sturdy, ensuring a long service life. The waterproof shell also enhances durability.
• 【High Efficiency】The bar rod tying machine has a built-in pure copper brushed motor and premium tying wire, which can tie about 1,500 knots after a full charge, and each knot can be completed in just 0.8 seconds. Meanwhile, it adopts a bipolar quasi-force structure, and the knotting can be completed without the need for connectors.
• 【Safety Guard】The built-in automatic locking mechanism of the protective cover can prevent the tying wire from falling off. After standby for more than 90 seconds, the machine will sound an alarm to ensure safe use.
• 【Long Endurance】The lithium-ion battery with a large capacity (4500mAh) can support this machine to operate for approximately 2 hours after it is fully charged, meeting your long-term bundling needs.
• 【Application】This rebar tier gun is suitable for bundling steel bars and can be widely used in construction sites, large bridges, highways, railways, tunnels, mining construction, farms, garden fences, floor pipelines, heating floor nets, etc.