512Hz Underground Pipe Locator Water Portable LED Display Pipe Inspection Locator for Pipeline Blocking Clogging

Spec: Item Type: Underground Pipe Locator Working Frequency: 512Hz Modulation: None Battery: 6 x AA Batteries (Not Included) Usage Time: 4 Hours Intermittent Use Sound Output: 50-1000Hz Depending on Strength Operating Temperature: -20℃ to 60℃ Assembled Length: Approx. 535mm / 21.06in Sensor: Separation angle sensor for peak and zero acquisition Weight: Approx. 1805.00g / 63.67oz How to Use: Overall Layout Power On/Off (Long press to power on; Long press to power off) Near/Far switch controls the overall sensitivity. It is recommended to use the 'Far' position when starting to locate the transmitter. When you are close to the transmitter and the meter reaches full scale and you cannot further reduce the sensitivity, switch to 'Near' to pinpoint its exact location. Meter Indicator - Indicates the strength of peak (right side) and zero (left side). Speaker - Allows you to hear the beep or continuous sound from the transmitter, depending on the transmitter use case. Battery Indicator - Displays battery health status. Instructions: Adjust the locator's Near/Far switch and +/- according to the actual environment to better match the transmitter. It is recommended to initially set to Far mode (Signal set to 9), reduce sensitivity level when the LED screen shows a very strong (you can also hear a louder sound), and then narrow down the detection range. Package List: 1 x Detector 1 x Detector Accessories 1 x User Manual 1 x Earphone 1 x Aluminum Case Notice: 512 has only one mode, the 'detector' mode. In detector mode, the receiver searches for transmitted by a small probe or camera with a built in transmitter that is wired through pipes. The detector must emit a 512Hz signal, and

• Built in Sensing Coil: The underground pipeline handheld detector is equipped with a built in sensing coil, can receive magnetic from the pipe, the coil generates an induced current to calculate the direction and position of the transmitter.
• Wide Application: The underground pipe locator is suitable for water supply pipes, cable pipes, underground construction, cave exploration, underwater research, and more. Use it for efficient exploration work.
• LED Screen Display: The water supply pipe locator comes with an LED screen, providing clear and convenient monitoring data. Enhance your exploration experience with this practical feature.
• High Accuracy: The 512Hz transmitter allows easy determination of probe location. The receiver features a separated tilt sensor to obtain peak and zero signals, ensuring effective exploration.
• Sturdy Construction: Made from premium ABS material, the pipeline blockage locator is sturdy and water , suitable for underwater measurements, ensuring long lasting use.