4into1 Fork & Dust Seal Kit - Compatible with Suzuki GS450 GS550 GT550 GS650 E/G/GL GS750 E/L GT750 RE5

Set of 2 forks seals and 2 dust seals for many of the late 70''s Honda''s as well as a other makes. When replacing fork seals be very careful not to scratch or gouge the aluminum during the removal of the old seals. Use a fork seal driver to install the new seals. Be sure to drive it in evenly and make sure it fully seats so the snap ring can be installed. If you''re unsure if your forks are stock please check the fork seal dimensions.The old dust boots become stiff and start to crack over time, keep dirt and water off your fork seals with a fresh pair of boots!These are high quality reproduction seals produced in Taiwan. When it comes to rubber parts and seals it''s generally better to install a brand new part instead of using a NOS part which has hardened due to age.Fork Seal:Inner Diameter: 35mmOuter Diameter: 48mmHeight: 11mmMaterial: NBR (Nitrile)Dust Seal:Top Opening ID: 35mm (1.4")Bottom Opening ID: 53.5mm (2.1")Overall OD: 60mm (2.35")Overall Height: 30.5mm (1.2")Inner Lip 5/8 before it starts to taper in (measured from the bottom)Fits Suzuki:GS450 - 1985-1988GS550 - 1977-1982GS550E - 1979GT550 Indy - 1975GS650E - 1981-1982GS650G - 1981-1983GS650GL - 1981-1983GS750 - 1977-1982GS750E - 1978GS750L - 1981GT750 Lemans - 1975-1977RE5 Rotary - 1975-1976

• Set of 2 forks seals and 2 dust seals for many of the late 70's Honda's as well as a other makes. When replacing fork seals be very careful not to scratch or gouge the aluminum during the removal of the old seals. Use a fork seal driver to install the new seals. Be sure to drive it in evenly and make sure it fully seats so the snap ring can be installed. If you're unsure if your forks are stock please check the fork seal dimensions. The old dust boots become stiff and start to crack over
• These are high quality reproduction seals produced in Taiwan. When it comes to rubber parts and seals it's generally better to install a brand new part instead of using a NOS part which has hardened due to age.
• Fork Seals: Inner Diameter: 35mm Outer Diameter: 48mm Height: 11mm Material: NBR (Nitrile)
• Dust Seals: Top Opening ID: 35mm (1.4") Bottom Opening ID: 53.5mm (2.1") Overall OD: 60mm (2.35") Overall Height: 30.5mm (1.2") Inner Lip 5/8 before it starts to taper in (measured from the bottom)
• See Fitment In Product Description